Sonnet-technologies Qio MR Manuel d'utilisateur télécharger pdf (Page 11)

Chapter 5 – Formatting Drives Connected to the Qio MR

Drive Formatting Overview

If you intend to format drives connected to the Qio MR using Windows

drive formatting tools, you may ﬁnd much more information by using

“format volume” as the search item in Windows Help. The procedure

listed below describes the process of formatting and conﬁguring drives

under Windows Vista; steps for formatting under Windows 7 are very

similar.

1. Turn on your storage system, start Windows, log in, and then click

Start > Control Panel.

2. In the Control Panel window, double-click Administrative Tools. If

you have not disabled User Account Control (UAC), a UAC window

will appear; click Continue.

3. In the Administrative Tools window, double-click Computer

Management.

4. In the Computer Management window, click Disk Management

under Storage to launch the Disk Management application.

5. If an Initialize Disk window appears or if disks are described as not

initialized, select a partition style for the attached drive(s), and then

click OK; the drive will be initialized (Figure 1). Repeat as necessary

with other drives attached to the Qio MR.

6. Right-click the ﬁeld next to the name ﬁeld of one of the attached

drives and select the formatting type you wish to use for it. Repeat as

necessary with other drives attached to the Qio MR (Figure 2).

7. Depending on the formatting type you chose, a New Partition

Wizard may appear; follow the onscreen instructions to complete

formatting of the drive(s). Once formatting is ﬁnished, the drives

are ready to use.

Figure 1

Figure 2

1 2 ... 6 7 8 9 10 11 12 13 14

Pas de commentaire

Sonnet-technologies Qio MR Manuel d'utilisateur Page 11