Sonnet-technologies Tempo SATA 6GB_s PCIe 2.0 Serial ATA Host Controll Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Sonnet-technologies Tempo SATA 6GB_s PCIe 2.0 Serial ATA Host Controll. Sonnet Technologies Tempo SATA 6GB_s PCIe 2.0 Serial ATA Host Controller User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Quick Start Guide
Quick Start Guide for Tempo SATA III 6Gb PCIe 2.0
You Should Have
The following items should be included in your product package:
One Tempo SATA III 6Gb PCIe 2.0 card
The following items are required (sold separately):
One or more external Serial ATA Drives
One or two external Serial ATA (eSATA) data cables
System Requirements
The Tempo SATA III 6Gb PCIe 2.0 host adapter card requires the
following in order to operate in your system:
One available PCI Express (PCIe) slot
Mac OS
®
X Version 10.5 or later, or Windows
®
7, or Windows Vista
®
eSATA connector
SATA I connector
Hardware Installation Steps for All Users (continued)
3. Remove the Sonnet card from its packaging, and then install it
into the slot; make sure the card is firmly seated and secured.
4. Close your computer.
Driver Information—Mac OS X
The drivers that enable the Tempo SATA III 6Gb PCIe 2.0 card to
work in your computer are installed as part of Mac OS X; the Tempo
card is ready to use when you power on your computer.
Driver Information—Windows
After starting up Windows, the drivers that enable the Tempo
SATA III 6Gb PCIe 2.0 card to operate in your system are installed
automatically. A Found New Hardware popup will appear. Then,
information regarding the process of identifying the card, and
searching for and installing the appropriate software will appear.
Finally, the messageYour new hardware is installed and ready to
use will be displayed, and then the popup will disappear.
Hardware Installation Steps for All Users
Before installing software, you mustrst install the Tempo card.
1. Shut down you computer, and then open it to access the
expansion card area (PCI Express slots); refer to your computer’s
user manual for specic information
2. Locate an available PCI Express slot and remove its access cover.
Windows users skip to the next panel; Mac OS users:
Mac Pro (Mid 2010), Mac Pro (Early 2009) and pre-2008 Mac
Pro users may install the card into any available slot; Mac Pro
(Early 2008) users must only use slot 3 or 4.
Power Mac G5 users should use slot 2 or 4, or slot 3 if necessary.
Tempo
SATA III
6
Gb PCIe 2.0
Serial ATA Host Controller for PCI Express® Slot
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Quick Start Guide

Quick Start Guide Quick Start Guide for Tempo SATA III 6Gb PCIe 2.0You Should HaveThe following items should be included in your product package:• One

Page 2 - Contacting Customer Service

Using the Tempo Card—Windows UsersListed here is some general information about using the Tempo card with your Windows desktop computer: • Always sh

Commentaires sur ces manuels

Pas de commentaire