Sonnet-technologies Encore_ZIF Processor Upgrade Manuel d'utilisateur télécharger pdf (Page 29)

3. Unscrew the bottom brace screw (Figure 5).

Be careful not to lose the screw since it can

easily drop into the opening of the case in

front of the brace.

4. Remove the brace from across the logic board

(Figure 6) and temporarily set the brace and

screws aside.

Disconnect Logic Board Cables

1. You will need to carefully disconnect the SCSI

and power cables (Figure 7) from the logic

board in order to easily remove the current G3

processor card. The cables should be discon-

nected in the following order:

• Internal drive(s) power cable (Figure 7-Label A)

• Main SCSI cable (Figure 7-Label B)

• Secondary SCSI cable (Figure 7-Label C)

• Logic board power cable (Figure 7-Label D)

2. Disconnect the internal drive(s) power cable

(Figure 8).

1-6

Figure 6; Figura 6

Figure 5; Figura 5

Figure 7; Figura 7

bottom brace screw

logic board brace

current G3 processor

card (with heatsink)

Figure 8; Figura 8

internal drive(s)

power cable

logic board brace

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 119 120

Pas de commentaire

Sonnet-technologies Encore_ZIF Processor Upgrade Manuel d'utilisateur Page 29